Build a multicam from clips
Drop camera and recorder files; Speaker Cut syncs every angle to a master by sound – no timecode needed – and joins takes a recorder split into pieces.
Start from Build a multicam from clips on Home (or drop the files on Home).
What to bring
- Every camera file and every external audio recorder file (lav packs, wireless mics that record onboard, a Zoom/field recorder, a StreamYard program track). Folders work too; lanes are named after their folders.
- Media stays where it is. Speaker Cut references it and never copies or uploads it.
Add the shoot
Drop the whole shoot folder, or use Choose a folder… / Choose files…. Each camera or recorder becomes one angle; files a recorder split into ~30-minute pieces are stacked into one angle. Rename an angle by clicking its name; click its file line to reorder, add or remove pieces.
Pick a master (◆)
Click the ◆ on the lane that should be the master. The master is the one feed that hears everyone – a program mix, a room mic, or a wide camera that hears the whole table. Every other angle is synced against it by sound.
- Remote recordings (StreamYard, Riverside): the program mix.
- In person with a recorder: the room mic or the recorder’s mix track.
- Cameras only: the wide.
Sync
Click Sync by sound. Speaker Cut lines everything up by audio, at many points across the session. Timecode isn’t required (if your cameras carry it, it’s kept). Each angle then shows Master, Locked · ‹offset›, Low confidence or No lock, and a banner says “Synced. All ‹n› angles line up with ‹master›.” Click Sync again after changes, or Next: who’s who → to continue (see Who’s who).
To change angles later, use Change angles on the episode’s Build tab, then Save to project.
It handles real-world messiness:
– Cameras and recorders that split a long take into pieces are joined end to end and play as one continuous feed.
– Files that started far apart still sync.
Think in people
Each person has a camera (the picture to cut to) and a mic (how Speaker Cut knows they’re talking). A webcam is both; an external recorder is audio-only; a wide or room camera is video-only and is used as the wide shot.
If an angle doesn’t sync
It didn’t share enough sound with the master. Usually the camera’s mic was off, or the master can’t hear that person. Give the angle scratch audio or choose a master that hears everyone, then build again. See Sync problems.
When it’s built, open the Cut tab – the episode is already cut. See The Cut tab.