Who’s who (people, mics and cameras)
Name each person, set whose mic each audio lane is and what each camera shows, and pick one wide. Continue to cut unlocks when everyone has a mic and there's a wide.
After building a multicam, importing an ATEM recording or bringing a Final Cut multicam, Speaker Cut asks who’s who. It’s also on the episode’s Build tab (button Save changes).
Show
Pick the episode’s Show. The cut feel and auto-mix start from that show’s settings. If the show knows its hosts’ voices, Speaker Cut listens for them and offers “Recognized by voice from ‹show›…” with Use these names.
People
Name everyone who talks (Add a person for more). Each person needs a mic; a camera is optional.
Mic column – whose audio is each lane?
Set each recorder to its person (‹Name›’s mic), the feed that hears everyone to Master audio, anything else to No mic. Each person has one mic. Listen plays a few seconds where that person talks (Another spot for more).
Shows column – what does each camera show?
A person, a pair (A + B, a two-shot), All speakers (wide), or Don’t show. Exactly one camera must be the wide. Audio-only lanes say Audio only.
Two or more cameras on one person: one is their A-cam, the others are B-cams that punch in now and then for variety (click B-cam · make A to swap).
Continue to cut
Continue to cut stays inactive until every person has a mic and one camera is the wide; the status line says what’s missing (“Pick the wide shot.”, “‹Name› needs a mic.”). Until who’s who is done, the Cut, Transcript, Highlights and Export tabs send you back to Build.