Speaker Cut.Wiki Download free
Troubleshooting

Sync problems

What to do when an angle won't sync, a wireless-mic file isn't placed, or files are set aside on an ATEM import.

Updated Nov 13, 2026

An angle won’t sync (“No lock”)

Speaker Cut syncs by sound against the master. If an angle didn’t share enough audio:
– Check that angle actually recorded sound (camera mic on).
– Make sure the master hears everyone – a program mix, room mic or wide camera. Switch the master and build again; it only takes seconds.

A wireless-mic file wasn’t placed (ATEM import)

  • The file may belong to another take – Speaker Cut sets those aside and the import summary says which and why.
  • Add the whole folder from each recorder, not single files; files split into ~30-minute chunks are joined automatically.
  • A recorder that started before the ATEM is fine.
  • Pick the right master audio (e.g. the ATEM input carrying your mix, like MIC 1).
  • Fixed in 2.0: a switcher mic input with nothing plugged in no longer stops wireless mics from syncing.

Files set aside on import

Files from another take, or the ATEM’s own audio files, are set aside automatically instead of stopping the import. The import summary lists them.

Still stuck?

Use the chat on getspeakercut.com and tell us the shoot setup (cameras, recorders, ATEM model) and what the import summary says.